Local AC tonnage tools are more private and work offline; online tools save installation but files leave your device. Tonnage is cooling capacity, not house size; use a load calculation instead of guessing by room count.
Why it matters
Use local for sensitive files; online is fine for small temporary ones.
One ton is about 12,000 BTU/h.
Step by step
- Decide whether this is a full system replacement, outdoor unit only, or repair; the cost logic differs.
- Record square footage, climate zone, existing ducts and electrical capacity.
- Get at least three quotes with equipment, labor, ducts, electrical, removal and permits separated.
- Compare 10–15 year total cost, not just the lowest first-year price.
Common mistakes
- Comparing only an installed lump sum without model and SEER2/HSPF2.
- Ignoring duct leakage, electrical upgrades and permits.
- Sizing by room count instead of a load calculation.
- Treating the lowest bid as the lowest total cost.
Checklist
- Quote lists model, tonnage and efficiency.
- Includes a Manual J load calculation or equivalent.
- Ducts, electrical, removal, permits and commissioning are separate line items.
- Warranty covers labor and refrigerant.
- Rebate/tax-credit responsibility is documented.
Key facts
- One ton is about 12,000 BTU/h.
- Oversizing can cause short cycling and poor dehumidification.
- Windows, insulation and climate affect load.
FAQ
Local or online tools for AC tonnage?
Local AC tonnage tools are more private and work offline; online tools save installation but files leave your device. Tonnage is cooling capacity, not house size; use a load calculation instead of guessing by room count.
How long does it take?
Usually 1-3 minutes; for intermittent issues, run 30 seconds and retest elsewhere.
Is data uploaded?
Runs locally and does not upload video/audio; extensions may still read the page.
Source: ACCA