The Full HVAC Replacement Process
Replacing HVAC is not buying a box and installing it; it is a system project involving load, ducts, electrical, permits and commissioning. Do the load calculation first, then select equipment, and only then compare prices.
1. Load and sizing
Use Manual J or an equivalent method; do not guess tonnage from square footage alone.
Check whether existing ducts can handle the new airflow; undersized ducts can make high-efficiency equipment perform poorly.
Confirm electrical capacity, refrigerant line length and condensate drainage.
2. Quote and contract
Require itemized pricing: equipment, labor, ducts, electrical, removal, permits and commissioning.
Specify model, tonnage, SEER2/HSPF2, refrigerant type and warranty.
Confirm change-order and delay terms to avoid post-startup add-ons.
3. Commissioning and acceptance
Request commissioning records: airflow, static pressure, temperature split, refrigerant charge and operating current.
Check drainage, insulation, filter and thermostat settings.
Keep permits, invoices, warranty and rebate paperwork.
FAQ
Can I replace only the outdoor unit?
Sometimes, but indoor unit, refrigerant and warranty matching matter; a mismatch can reduce efficiency and affect warranty.
Is a 2x quote difference normal?
Possible, but usually reflects equipment tier, duct/electrical work, permits and warranty; compare line by line.
Sources
More guides
HVAC Quote ChecklistRead guide继续读
按顺序读,或跳到同主题的其他指南。